Viruquat 300, 25L

"

---

Features & Benefits:

• Independently proven efficacy against bacteria, viruses and fungi
• Proven effective against Avian Influenza
• Proven effective against African Swine Fever
• DEFRA approved for Disease of Poultry, General orders and Foot and Mouth disease
• Residual activity on porous and semi porous hard surfaces
• Non-corrosive on hard surfaces
• Retains activity in the presence of organic matter
• Formulated to overcome hard water conditions
• Economic in use at guided dilutions

---

Application:

For optimal performance apply to a pre-cleaned, dry surface. Pre-clean with a Neogen detergent such as Farm-Foam Evo or Sureclean.

Area of disinfection	Dilution	Application
General Surface Disinfection	1:100 to 1:300	Prepare a Viruquat 300 solution diluted at 1:100 to 1:300 and apply at the rate of 300ml per square metre as a wet spray or through suitable foaming equipment.
Removable Equipment	1:300	Immerse in a Viruquat 300 solution diluted at 1:300 for a maximum of 30 minutes, remove, rinse with clean water and allow to dry before putting back in place.
Boot Dips	1:100	Prepare Viruquat 300 solution diluted at 1:100. Replace twice per week or when heavily soiled.
Vehicle Disinfection	1:100	For automated drive-through sprayer system or via pressure washer/knapsack sprayer prepare Viruquat solution diluted at 1:100.
Thermal Fog	1:4	Prepare a Viruquat 300 solution diluted at 1:4 applied at 9-10L/1000m2 with associated thermal fogging equipment, such as PulsFog K10. Allow 24 hours before placement of birds or livestock after the application.

---

 

"